Step 1

Area Inspection and Preparation

Two of our certified technicians will arrive on the job site as scheduled in a decalled vehicle or a non-decalled vehicle.
They will fill out an activity sheet – mapping out where all the vents are in the house.

Step 2

Our certified technicians will use commercial grade equipment

Step 3

To protect the floor, our technicians will layer drop sheet.

Step 4

Any pets, children, or toys should be kept away from the work areas, (if possible out of the house)
This is to maximize safety and minimize interruptions to the work process.

Step 5

All vents are covered with foam blocks(black or grey) or blue paper or closed before starting work to achieve negative air pressure and avoid blowbacks.

Step 6

Our technicians will begin our work from the furnace room.

Step 7

This is what your building’s duct system looks like before cleaning.

Step 8

Our commercial graded equipment vacuum is attached to the supply and return lines.

Step 9

Air pressure of 300 PSI will be blown into all return vents, first, to push dirt and debris into main lines for cleaning.

Step 10

Then the same air pressure of 300 psi will be blown into all the supply vents to push dirt and debris into main lines for cleaning.

Step 11

Main lines located in the basement are then cleaned with our retractable snake jet system (with air pressure of 300 PSI).
This tool will clean the hard to reach places, including the corners within the line and bring all the loose dirt towards the vacuum working as an air-rake.

Step 12

All main duct lines are cleaned with a Semi robotic brush which cleans the inner walls of the duct system.
This is repeated 2-5 times as necessary to loosen and agitate dirt and debris towards vacuum.

Step 13

Main lines are then again cleaned third time with our retractable snake jet system (with air pressure of 300 PSI).

Step 14

This is what your building’s duct system looks like AFTER cleaning.

Step 15

All one-inch access points are closed by installing black plugs Eight-inch access holes are covered using metal plate, sealed with duct tape or aluminum tape.

Step 16

The work area is cleaned. The furnace and air conditioning unit is inspected to ensure everything is in order.

Step 17

We will give a Clean Air Certificate.

Step 18

We will give a report of our progress to the main occupant.
We appreciate your business and we will do whatever it takes to deliver the best service possible.

Twitter feed is not available at the moment.

Unique Furnace & Duct Cleaning Inc

4.6

Based on 15 reviews

review us on

Nasser Daher

16:24 03 Dec 24

Thank you to Unique Duct cleaning and the whole team for doing a wonderful job at my place:) You guys did a great job!

Aisha Kulsoom

21:07 24 Apr 24

good company

Edel Costales Laturnas

20:02 23 May 23

Raj and areslan did excellent in cleaning our dryer vent.. I will highly recommend..

Marlena Scarpiello

18:19 12 May 23

Great service from Raj and Waleed, fast and effective service.

Anita Kozutsky Lewis

02:16 19 May 22

Hard working Raj and Harman helped me understand process and were able to get to third floor and basement of my 2... heater home . My ducts now clean all is good .read more

Edi Kapaj

15:22 12 Apr 22

Raj and loving did a great job. Highly recommend👍🏼

Rajdavinder Punia

18:36 30 Mar 22

Provide great training, excellent place to work. First priority is customer satisfaction always. Provide a lot of... services other than duct cleaning.read more

Gaurav Bhargava

17:32 19 Jun 21

This company is amazing. I got the aeroseal duct sealing done through them and it has changed the air flow in my... upstairs 3 times to what it used to be.

Beyond that...Babur, Raj and Aleem were at my home for 10 hours straight without a break helping me fix a problem which was my own builders fault and they did that at no extra charge.

I highly recommend this company for duct cleaning and duct sealing because they deliver what they promise and go above and beyond to make their customer feel special and satisfied.read more

Merlyn Lim

18:52 28 Sep 19

Abhay and Rajesh did an amazing job in our house. There is no dust after the cleaning, and we are compleatly satisfide... with the job.read more

Muhammad Zakria Tariq

14:24 25 Mar 19

Truly an honest and hard working team of people.
keep up the good work guys.

Mi Lsa

16:55 09 Mar 19

They’re on time and they’re very nice guys! Did a good cleaning on our vents. Abhay and Arslan are very nice and did... the cleaning in good time. We’ll definitely recommend 😊read more

Younas Ahmad

02:41 26 Mar 18

Very good company

Anjaan Sa Jana Pehchana

18:16 30 Jan 18

very nice service. the technicians were very polite and were on time.

Elaine Park

17:10 08 Jan 18

Great experience. Very informative and helpful crew. Very prompt and effecient. Would definately have them in to do any... other jobs we needed done. Would definately recomend them.read more

Natalie Frantowski

16:56 19 Mar 16

We have used their service multiple times over the past years. Very friendly service , detailed, and impeccable... quality every time. I own a house painting company, and after we complete a job, we recommend our clients use Unique Providers.read more

More Reviews

Residential Duct Cleaning Process

Step 1

Area Inspection and Preparation

Two of our certified technicians will arrive on the job site as scheduled in a decalled vehicle or a non-decalled vehicle.

They will fill out an activity sheet – mapping out where all the vents are in the house.

Step 2

Our certified technicians will use commercial grade equipment

Step 3

To protect the floor, our technicians will layer drop sheet.

Step 4

Any pets, children, or toys should be kept away from the work areas, (if possible out of the house)

This is to maximize safety and minimize interruptions to the work process.

Step 5

All vents are covered with foam blocks(black or grey) or blue paper or closed before starting work to achieve negative air pressure and avoid blowbacks.

Step 6

Our technicians will begin our work from the furnace room.

Step 7

This is what your building’s duct system looks like before cleaning.

Step 8

Our commercial graded equipment vacuum is attached to the supply and return lines.

Step 9

Air pressure of 300 PSI will be blown into all return vents, first, to push dirt and debris into main lines for cleaning.

Step 10

Then the same air pressure of 300 psi will be blown into all the supply vents to push dirt and debris into main lines for cleaning.

Step 11

Main lines located in the basement are then cleaned with our retractable snake jet system (with air pressure of 300 PSI).

This tool will clean the hard to reach places, including the corners within the line and bring all the loose dirt towards the vacuum working as an air-rake.

Step 12

All main duct lines are cleaned with a Semi robotic brush which cleans the inner walls of the duct system.

This is repeated 2-5 times as necessary to loosen and agitate dirt and debris towards vacuum.

Step 13

Main lines are then again cleaned third time with our retractable snake jet system (with air pressure of 300 PSI).

Step 14

This is what your building’s duct system looks like AFTER cleaning.

Step 15

All one-inch access points are closed by installing black plugs Eight-inch access holes are covered using metal plate, sealed with duct tape or aluminum tape.

Step 16

The work area is cleaned. The furnace and air conditioning unit is inspected to ensure everything is in order.

Step 17

We will give a Clean Air Certificate.

Step 18

We will give a report of our progress to the main occupant.

We appreciate your business and we will do whatever it takes to deliver the best service possible.

Recent Posts

Address

Phone:

Email:

Monday - Friday

Saturday

Sunday